DJI Goggles Racing Edition FAQ Section
What are the main differences between DJI Goggles Racing Edition (RE) and DJI Goggles?
DJI Goggles RE feature a redesigned facial pad and headband, making them even more comfortable to wear. In addition to all the functions of DJI Googles, DJI Goggles RE also support Sphere pano photo viewing and local video playback. DJI Goggles RE also work with the DJI OcuSync Air Unit and can receive analog video signal.
Which DJI drones are compatible with DJI Goggles RE?
DJI Goggles RE work with all the DJI drones compatible with the original DJI Goggles, including the Spark, Mavic Pro, Phantom 4 Series, and Inspire 2.
What's the SMA port on the body of the Goggles RE for?
In addition to the four antennas built into the original DJI Goggles, DJI Goggles RE are also compatible with external antennas, which work with the built-in ones to support 5.8 GHz video transmission. The external antennas connect to the SMA port on the Goggles' body.
What video formats do DJI Goggles RE support?
MP4, MOV, MKV
Do DJI Goggles RE support any third-party flight controllers or remote controllers?
Supported flight controllers: KISS, F3, F4, and Naze
Supported remote controllers: X9D (FrSky), DEVO 10 (Walkera), T8FG (Futaba), T14SG (Futaba), WTF09sll (WFLY), and AT9S (RadioLink)
How can I view Sphere pano photos with DJI Goggles RE?
1. Sphere panos on SkyPixel can be downloaded to an SD card and viewed with Goggles in the Local Storage interface.
2. If Sphere panos are saved to a DJI aircraft, you can download the photos to Goggles RE from Aircraft Storage then view them in the Local Storage interface.
3. To view Sphere photos from a PC directly, go to http://www.skypixel.com and download them via DJI Assistant. Then you can view the photos in the Local Storage interface.
DJI OcuSync Air Unit
What is the SD card slot for?
Videos recorded by the DJI OcuSync Air Unit will be stored on the SD card inserted into the Air Unit's SD card slot. Videos rendered from the live view will also save to the Goggles' SD card slot. Please note that these SD slots do not support hot swapping.
Can I connect the Air Unit with any non-DJI camera?
Does the OcuSync Air System support non-DJI antennas?
Yes. However, we strongly recommend you do not use non-DJI antennas as compatibility problems may arise.
What batteries does the Air Unit support?
3S or 4S batteries.
How do I update the video transmission module of the Air Unit?
Connect the video transmission module to a PC with a USB cable. Open DJI Assistant 2 and choose the firmware version you need. Proceed with the firmware update.
Can I remove the metal shell from the video transmission module to reduce weight?
No. The metal shell is used for cooling and fixing the device. It should not be removed.
Can I connect the camera to other devices other than the DJI OcuSync Air Unit?
Can I use the camera of the OcuSync Air Unit to take photos?
No. But you can take screenshots of the camera view by pressing and holding the Goggles' touch pad with two fingers.
What are the differences between the three compatible antennas?
DJI Goggles RE come with a set of three compatible antennas for different scenarios:
• Pagoda: This circularly polarized antenna performs best at 5.8 GHz.
• Cylindrical: Also circularly polarized, this antenna operates at 2.4 and 5.8 GHz for fully integrated performance.
• Dipole: Linearly polarized, this antenna operates at 2.4 and 5.8 GHz and is lightweight, allowing for a clear video feed at close distances.
Can I bend two antennas to make them cross each other?
No. Bending the antennas may permanently affect their service life and performance.
Can I remove the silicone cover from a Dipole antenna?
It is recommended you do not remove the silicone cover.
When using Goggles RE to receive analog video transmission, can I use antennas other than the official DJI Pagoda Antenna?
No. In many countries, local laws and regulations do not allow unofficial antennas to be used.